-40%

Dental Digital X-Ray Imaging Unit Machine+X-Ray Film Processor Darkroom

$ 327.34

Availability: 100 in stock
  • Country/Region of Manufacture: China
  • Intended Use/Discipline: Dental Laboratory
  • Model: BLX-5
  • Restocking Fee: No
  • Item must be returned within: 60 Days
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Condition: New
  • Return shipping will be paid by: Buyer
  • MPN: GJ1170100101
  • Brand: AZDENT
  • All returns accepted: Returns Accepted

    Description

    Feature:
    1.) The tube voltage frequency of this machine is 30 KHz, and the tube current is 0.2 MA. The radiation scope is at an angle of 24 degrees, located within a distance of 1.2 meters ahead.
    2.) Toshiba 0.3mm x 0.3mm micro-focus tube
    3.) No protective operation room is needed when installing the complete machine.
    4.) Flexible adjustment of position and angle of handpiece
    5.) Compact in volume, light in weight, convenient for carrying
    6.) Time is adjustable, high contrast of picture, imaging in focus
    7.) There are vacuum components and high-pressure parts inside of the machine, so for your safety and the maintenance of the machine
    8.) The tube head is equipped with excellent radiation-shield protection (except the radial mouth, and tests have shown that the radial index is zero. Safety is guaranteed.
    9.) Non-film inspection and storage can be realized when corresponding to a sensor.
    Specifications:
    Voltage: 110v±10% and 220V±10%
    Power: 24V 8000MA
    Charger: 220V/110V, 50Hz
    Tube current: 0.1mA
    Rating: 60W
    Frequency: 30 KHz
    Exposure time: 1-9 seconds optional
    Leak radiation: < 20μgy/h(12lb)
    Focus Skin Distance: >20cm
    Tube voltage: 60KV
    Relative Humidity(RH) < 80%
    Storage conditions: 5-40 degrees Celsius, relative Humidity
    Net weight: 5.5 kg
    Dimension: 47 x 42 x 19 cm
    Operation of the Main Unit:
    1. Upon receiving, open the box and check the product for possible damage during shipping.
    2. Make sure the fittings on the encasement list are packaged within the box.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Features:
    1. It is use view of the dental film processing design ,can wash 30*40mm single film.
    2. The machine is small size ,can be directly placed on the table ,Reliable performance, simple operation ,convenient maintenance.
    3. Opreating in the daily light can obtain the best dental image all the same
    4. The main components of this product for plastic products, with excellent corrosion resistance and strength ,qualitative light easy to move ,can be used in any solid table.
    Technical :
    Use for film size:30*40mm
    The biggest irrigation width:50mm
    Medicine tank capacity: enhancement of 250ml,fixing 250ml,250ml water
    Washing method: manual
    Developing temperature: room temperature
    Material: engineering plastic
    Net weight:1.5KG
    Products size:360*280*310mm
    Note:
    1)
    The film exposure and development time is too long, all can make the film image density is too high, film black. Too little time to film image density is low ,with lighter film.
    2)
    The film should be uniform in potions cup stir, to ensure that the wash effect.
    3)
    Time limit, potions have certain times and after each use should cover the lid of the medicine cup, depending on the manufacture`s instructions.
    4)
    if have a potion fell into eyes, rinse with plenty of water immediately.
    Packing list:
    Main machine : one set
    Three potion 250ML cup
    FDA Statement
    The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory  agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your   status as an authorized purchaser of this item before shipping of the item.
    Seller name: dentistworks
    City,State: SHENZHEN,China
    Telephone number: 0755-26789362